Resimac Cooling Tower & Basin Repair Systems. 

What are the Typical Causes of Failure of Cooling Towers & Basins?

Environmental Ageing/Weathering.
UV Exposure & Solar Degradation.
Bi-Metallic/Galvanic Corrosion.
Vibration/Mechanical Stress Thermal.
Fatigue/Cracking Crevice.
Corrosion & Pitting.
Wall Thinning/Friction.
Chemical Exposure.
Particulate Erosion.
Hairline Cracks.

What are the Treatable Repair Areas of Cooling Tower & Basins?

Basin Floor & Sumps, Structural Steel, Concrete & Internal Walls, Blades.
Seals deep fractures in concrete and steel to prevent further spreading.
Adheres to damp substrates, drastically reducing emergency repair downtime
Blocks moisture ingress by stopping water and chemical penetration

Cooling Tower Repair System:
Localised Corrosion/Surface Corroded Cooling Tower/Paste Grade Epoxy/Protective Coating Second Layer/Protective Coating First Layer.

What Resimac Products are used for Localised Corrosion?

101 Metal Repair Paste.
501 CRSG - Surface Tolerant Epoxy.
501 CRXL – Extended Working Life 501 ARXL – Abrasion Resistant Grade.

Preparation & Application for Localised Corrosion on Cooling Towers & Basins.
Mechanically abrade or pressure wash surfaces.
Apply the selected paste to the damaged surface.
Degrease & clean surfaces using an cleaner or solvent.
Apply two coats of selected coating by brush or roller.

What are the Resimac Protective Coating Products?

501 CRSG - Surface Tolerant Epoxy.
501 CRXL – Extended Working Life.
501 ARXL – Abrasion Resistant Grade.

Cooling Tower Repair System Protective Coating:
Surface Cooling Tower/Protective Coating/First Layer Protective Coating/Second Layer.

Preparation & Application:
All surfaces must be hydro-blasted at a minimum 1700 bar.
Degrease & clean surfaces using an cleaner or solvent.
Apply two coats of selected coating by brush or roller.

Basin Repair System Spalling Concrete:
Protective Coating Second Layer/Protective Coating First Layer/Primer/Repair Mortar/Surface Damaged Basin.

What are the Resimac Concrete Spalling Products?

503 SPEP.
503 SPEP XL.
505 Damp Seal.
501 CRSG 501 CRXL.
501 ARXL.
570 Concrete Patch Repair XF.
573 Concrete Fastfill Screed.
576 Quartz Screed.

Preparation & Application:
Mechanically abrade or pressure wash surfaces/Apply the selected primer to prepare for the substrate/Apply the selected mortar to the prepared surface/Apply two coats of selected coating by brush or roller.

✅ Seals deep fractures in concrete and steel to prevent further spreading
✅ Blocks moisture ingress by stopping water & chemical penetration to halt internal rust and concrete spalling
✅ Restores structural strength, rebuilds degraded surfaces to safely handle heavy mechanical loads again
✅ Adheres tightly even to damp substrates, drastically reducing emergency repair downtime

Resimac Cooling Tower & Basin Repair Systems Product Range.

✅ 101 Metal Repair Paste
✅ 503 SPEP
✅ 503 SPEP XL
✅ 505 Damp Seal
✅ 501 CRSG - Surface Tolerant Epoxy
✅ 501 CRXL – Extended Working Life
✅ 501 ARXL – Abrasion Resistant Grade
✅ 570 Concrete Patch Repair XF
✅ 573 Concrete Fastfill Screed
✅ 576 Quartz Screed