Innovative Composites & Industrial Coatings
Repair Protect Upgrade
Resimac SA.
506 Aluprime corrosion-resistant primer.
506 Aluprime thin-film, surface-tolerant corrosion-resistant primer, moreover a solvent-based epoxy base-coat for manual & mechanically prepared surfaces and provides long-term protection in C1-C5 corrosive environments.
Low-Temperature Cure.
Compatible with acrylic and polyurethane top coats.
Apply to metallic surfaces suffering from condensation/damp.
506 Aluprime: low-temperature cure, corrosion-resistant primer.
506 Aluprime is a low-temperature cure, corrosion-resistant coating.
506 Aluprime is a two-component, solvent-based thin film epoxy coating primer, that has been designed to be applied to manual or mechanically prepared metallic surfaces. The coating offers excellent corrosion and weathering resistance and can be overcoated with any of the Resimac UV stable top coats.
Solvent-Based Epoxy Technology.
Thin Film Coating.
Apply by Brush, Roller or Spray.
Surface Tolerant.
Low Temperature Cure (5C).
Compatible with acrylic and polyurethane top coats.
Tolerant of less-than-ideal surface preparation.
Provides long-term protection in C1-C5 corrosive environments.
Typical applications of 506 Aluprime.
Pipelines.
Cold water lines.
Pipework.
Internal & external tank surfaces.
Sheet and bearing piles.
Structural steel.
Process equipment.
Process Pipes at chemical sites that require protection from external corrosion. All surfaces were mechanically abraded and coated with 506 Aluprime and 508 UVPU top coat
External pipe surfaces at a wastewater treatment plant had become badly corroded. The surfaces of the pipes were mechanically abraded and protected with 2 x coats of 506 Aluprime
Why use 506 Aluprime?
506 Aluprime thin-film surface-tolerant corrosion-resistant coating solvent-based epoxy base-coat for manual & mechanically prepared surfaces. Provides long-term protection in C1-C5 corrosive environments, low-temperature cure. 506 Aluprime is a low-viscosity two-component solvent-based epoxy primer designed for the long-term protection of steel and concrete structures against corrosion. The coating can be applied to mechanical or abrasive blast-clean surfaces and will cure at temperatures as low as 5˚C.
Apply to mechanical, hydro-blasted or abrasive blast-cleaned surfaces
Cures at temperatures as low as 5˚C (41˚F)
Apply to metallic surfaces suffering from condensation/ damp
Ideal for protection against corrosion and weathering
Solvent-based epoxy primer
Surface tolerant coating
Corrosion-resistant coating.
Capable of curing at temperatures as low as 5˚C
Thin Film Coating
Apply by Brush, Roller or Spray.
506 Aluprime can be used to resurface and protect the following.
Bridges.
Stairways.
External tank surfaces.
Structural steel.
Machinery.
External pipe surfaces.
Transformers.
Steel containers.
Pump & Valve casings.
Storage tanks.
Structural steel.
External pipe surfaces.
Concrete structures.
Road & rail bridges.
Railings & barriers.
506 Aluprime thin-film surface-tolerant corrosion-resistant coating solvent-based epoxy base-coat for manual & mechanically prepared surfaces, Provides long-term protection in C1-C5 corrosive environments,
Low-Temperature Cure
506 Aluprime is a thin-film surface-tolerant corrosion-resistant coating solvent-based epoxy base-coat for manual & mechanically prepared surfaces, Provides long-term protection in C1-C5 corrosive environments.
MSDS, TDS, Brochure, Application Instructions .PDF downloads.
Corrosion Protection. ISO 12944 Classification Guide 506 Aluprime
Resimac Corrosion Protection Systems Guide
506 Aluprime Quick application guide – brush or roller
506 Aluprime Quick application guide – Airless Spray
506 Aluprime Product Specification
506 Aluprime Technical Data Sheet
